|
And the two put together…
And then thru the magic of television….
And now I have a mobile base with uprights…the beam pocket is just plywood with a filler piece between the uprights .
Here is a rare photo of me actually working…you gotta be quick to catch me workin’. As you can see to my left, I’m just going to do lap joints on the horizontal clamp supports. This side will be a grid for bar clamps. What the heck SWMBO took several…squatting like this is hard on my…everything.
Horizontals and one vertical only one side of any of the joints are cut I need to do the other half which are all on the horizontals. But I’ll get those after I get the bottom verticals and their horizontals that will be for c-clamps. I want the c-clamps, which are quite heavy, to be near the base and distributed on both sides.
Mock-up with clamps, I figure I can double the number of bar clamps that I already have and still get them on one side of the rack.
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
